|
Craft Courses / Tuition - see bottom of
page (free advertising)
For craft projects, ideas and templates
please click here
The great precision of the blacksmiths, with their profound understanding of
puddled iron, created a wealth of durable, intricate art over the centuries.
Today wrought ironwork is made more accessible through the use of less expensive
mild steel.
Origins
Wrought ironwork is an ancient craft which flourished as far back as the
Roman occupation of Britain. In medieval times local blacksmiths were skilled,
producing all sorts of wrought ironwork from pots and pans to jewellery and
snuff boxes.
The blacksmiths work over the centuries was partly determined by periods of
war and peace - in times of war the blacksmith was diverted from religious,
domestic and agricultural works to the need to forge weapons. The late 19th
century saw a revival of interest in the craft and some beautiful examples of
wrought ironwork date from this time.
Today, the craftsperson normally uses mild steel, which is less costly than
traditional puddled iron. But the term wrought ironwork is nevertheless used to
describe items worked (not forged) in mild steel. The art of wrought ironwork
lies in the use of heat to work the metal into your chosen shapes and to then
form a bond between the appropriate surfaces.
 Basic techniques
The basic techniques of wrought ironwork - sawing, filing, drilling, shaping
and bonding the metal - are straightforward to learn.
The craftsperson begins by making a full scale drawing of the design to serve
as an accurate guide while the work is in progress.
The metal parts needed to make up the design are cut to accurate lengths.
This is done either by hand using a hacksaw or with a special machine.
Using heat, the metal parts are now worked into chosen shapes and then bonded
together - this is usually referred to as forge work. The metal is shaped in a
furnace or fire which should be fuelled by coal or coke. There is a range of
tools, many of which have remained unchanged for centuries, used in combination
with hammers and chisels to achieve the right effects.
There are also two, more modern, techniques for welding metal. The gas
method, known as oxyacetylene welding, uses a flame produced from oxygen and
acetylene. The other method, known as arc welding, uses an electric current to
weld the surfaces.
Once the metal parts are shaped and welded together, the piece may be given a
decorative finish. Simple methods of finishing a work include using hammer and
tongs to form the metal ends into neat square or round points. Skilled
practitioners of wrought ironwork can produce extremely intricate work at this
stage, from leaf and flower motifs - acanthus leaves and roses, for example - to
scrolls.
Wrought ironwork can be dangerous - please do not attempt unless you are
properly supervised or trained.
Courses
If you offer wrought ironwork courses / evening classes / demonstrations -
please contact us to advertise your details here.
To learn proper wrought ironwork techniques the best starting point is to
contact polytechnics / art schools / workshops /colleges to see if they have any organized
courses.
If you are inspired to become
a professional wrought ironworker, you could also
consider a trade apprenticeship.
back
to top
back to
craft topics
To
add to this page please contact us - to link to this page please copy and
paste the url from the address bar.
Why not visit our craft forum to gain
tips, advice and chat to fellow crafters, click
here
Attention Craft
Workers!
We want to hear all about
your craft, the history and skill involved to make your craft from start
to finish. Photos of you at work would be great and step by step
instructions would be helpful. Any advice that you could give people
wishing to start up in the craft business. And if any courses, training,
talks, etc that you offer.
|
Crafts
Crafts
Crafts
Crafts
Crafts
.Wrought
Ironwork
Craft Topics
Introduction