|
Craft Courses / Tuition - see bottom of
page (free advertising)
For craft projects, ideas and templates
please click here
Introduction
From
the strength and solidity of basic timber come the incredibly thin sheets
of veneer that are needed for the craft of marquetry. The glorious
variations of grain that are revealed may be used to create delicate,
stylised pictures and beautifully balanced, symmetrical designs.
Origins
This fascinating art of decorative woodworking has been used
to embellish many items of furniture, panels, frames, screens and boxes
– and many other wooden artifacts – for centuries.
During the Renaissance period (14th-16th
centuries) Craftworkers used a technique called ‘intarsia’, which is a
form of mosaic woodwork. Another method of decorating the surface of wood,
known as ‘inlay’, was also practised.
For this, other materials – such as bone, ivory, shell and
precious gems and metals – were used in addition to wood veneers to
create designs of outstanding beauty.
Also at this time, strange new woods were being brought from
Europe and the Americas, as well as the East and the Indies. Often
remarkably beautiful, these woods meant that the craft of applied wood
decoration flourished. Marquetry reached its height in the seventeenth
century and continued to be a popular art form until the end of the
nineteenth century.
 Basic techniques
Veneers are cut from logs, either by slicing them extremely
thinly – most marquetry veneers are only about three quarters of a
millimetre thick – or by rotary cutting method which is similar to
unrolling a carpet. The veneers obtained may vary from the plain and
simple to the richly patterned and coloured, depending on the species and
the part of the tree from which they are cut.
Other striking grain patterns are obtained by slicing logs
where the trunk forms into branches – ‘the crotch’ – or at the
base, known as the ‘stump’ or ‘butt’. Many beautifully patterned
veneers are obtained by slicing through ‘burls’, which are those
large, irregular, knotty growths often seen on tree trunks.
Because marquetry veneers are sliced so thinly, it is
possible to cut them into free flowing shapes with a sharp knife. This,
along with a developed eye for veneer selection, forms the basis of the
art of marquetry. Once simple freehand cutting skills have been mastered
it is possible for marquetarians to experience the enjoyment of
‘painting pictures’, or ‘designing patterns’ with beautiful
coloured woods.
Plants, animals, landscapes, seascapes, still-life,
portraits, floral and abstract designs can all be created in marquetry.
The initial outline drawing supplies the master pattern for
the final picture. Therefore, its best to avoid shapes which are very fine
or intricate; clean, easy flowing lies are simpler to cut. When
constructing the design, the marquetarian may exercise a bit of artistic
license by omitting any tricky detail in order to simplify the design, as
each line represents a knife cut.
A variety of techniques are used for the cutting of veneers.
Because marquetry veneers are so thin a craft knife, such as an ‘X’
Acto type or a Swann-Morton surgeons scalpel, is the ideal tool for the
job.
However, depending on the skill of the craftsman, it is
possible to cut veneers with a fret saw or on a marquetry donkey.
The traditional marquetry donkey has a pair of vertical jaws
which are operated by a foot treadle to hold and release the veneer. This
means that the marquetarian can adjust the veneer before it is cut by a
fine horizontal saw blade that moves backwards and forwards.
All of these methods are ideal for cutting through several
veneers at once. They also make it possible for the marquetarian to
execute extremely fine and complicated work, for which a great deal of
cutting control is needed.
There are various ways of building up a picture out of
veneers, but the most widely used technique is called ‘the window
method’. The picture or design is cut out piece by piece and assembled
rather like a jigsaw puzzle. The veneer shapes are taped together as they
are cut and stuck to the base board.
The design is traced onto the background veneer (the largest
piece of veneer in the design). If the design does not have an overall
background, the design is traced on to a piece of stout card known as a
‘waster’.
Each shape in the design is cut out of the background or
waster one piece at a time. This leaves a hole or ‘window’ after the
piece is cut out, through which the marquetarian selects the piece of
veneer which suits the design best.
The window is then used as a template and traced around on to
the underlying piece of veneer, which is cut out. The design is then
progressively built up piece by piece.
The best baseboards or groundwork on which to stick marquetry
is usually a man made material such as plywood. This provides a solid and
stable base that is not prone to movement and warping. When the work is
finally assembled and glued on to the baseboard, it is finished by
removing any tape remnants and scraping away surplus glue. The surface is
then sanded to a smooth, fine finish and further enhanced with a wax
polish or suitable proprietary finish.
It is traditional to frame marquetry pictures with a
contrasting veneer border – a dark veneer is often the best choice –
to offset and compliment the design. These stylish framing borders are yet
another opportunity to add artistic and creative elements to the design.
Courses
If you offer marquetry courses / evening classes /
demonstrations - please contact us to advertise your details
here.
There are lots of books available to learn the skills from
home.
To
learn proper marquetry techniques the best starting point is to contact
polytechnics / colleges to see if they have any organized courses.
The Marquetry Society is a National Organisation dedicated to promoting the craft of Marquetry. It is made up of 24 Groups in various
parts of the country with contacts around the world. Each Group has instructors to teach interested parties from scratch. No prior experience
is required, just a desire to learn this fascinating craft. For full details please see the Society website www.marquetry.org There you will find
amongst other topics a list of the various Groups, Galleries displaying pictures of all abilities from Beginner to Premier class. We have a National
Competition each year and the pictures entered along with the winners are displayed on
the site.
back
to top
back to
craft topics
To
add to this page please contact us - to link to this page please copy and
paste the url from the address bar.
Why not visit our craft forum to gain
tips, advice and chat to fellow crafters, click
here
Attention Craft
Workers!
We want to hear all about
your craft, the history and skill involved to make your craft from start
to finish. Photos of you at work would be great and step by step
instructions would be helpful. Any advice that you could give people
wishing to start up in the craft business. And if any courses, training,
talks, etc that you offer.
|
Crafts
Crafts
Crafts
Crafts
Crafts
.Marquetry
Craft Topics
